RANE ONE Motorised DJ Controller - Secondhand

Full Description

Bridging the gap between turntable and controller

The RANE ONE sets itself apart from other DJ controllers thanks to the ground-breaking vinyl-style platter. The seven-inch platter provides exceptional accuracy when tracking your movements, providing the same feel as analog vinyl. It uses the same technology found in its sibling – the RANE TWELVE MKII.

The unique design unites the classic feel of an analog turntable with the digital era, ideal for transitioning between the two formats. The lack of a tonearm and needles (found on analog turntables) means you won’t have to spend time tediously replacing various parts. It also means you get the best possible audio performance as well as zero-error latency. You can even adjust the torque of the platter to suit your playing style.

Sample, slice, cue and access Scratch Banks with backlit pads

Take your mixes to the next level using the wide range of onboard tools, effects and features. With eight pads on each deck, the RANE ONE provides you with all the buttons you could need to trigger samples, slice sounds, generate hot cues and a whole lot more. Whether you want to drop in some sound FX like your DJ tag or want to create live remixes, the RANE ONE has you covered.

You can also use Serato’s Scratch Bank to generate scratch patterns on the fly whilst mixing. This unique mode allows you to load scratch samples instantaneously from up to four banks from Serato DJ Pro. You can trigger these scratch-friendly samples by simply tapping a pad. You can even start the sample from a point that you specify.

Incorporate software FX

Six radio-style buttons accompanied by two FX paddles allow you to incorporate software effects from within your chosen DJ software. You can tweak and fine-tune your effect using the beat parameter and depth controls for flexible customisation. There is a wide range of effects to choose from, allowing you to add some flare to your performance.

Familiar club-style layout

RANE incorporate their classic intuitive performance layout so no matter what gear you have used previously, you can familiarise yourself with the controller in seconds. The 3-band EQ on each deck, as well as the high-pass/low-pass filters allow you to mix and blend songs seamlessly. The filters are great for build-ups, perfect for creating anticipation before the big drop in the next song.

Each component has been specially picked to create the ultimate DJ controller. The faders are no exception to this rule. The professional-grade MAG FOUR faders are lightweight and precise, allowing you to cut and mix with absolute accuracy. It even features dedicated controls for looping, so you can remix and beat-juggle live!

Features

• Traditional feel of vinyl turntables in a digital DJ controller
• Famed RANE build quality and design
• Instant access to software FX via six radio-style buttons and two metal FX paddles
• Ultra-light MAG FOUR crossfaders for the utmost precision mixing and scratching
• Three-band EQ on each deck with high and low pass filters
• Dedicated loop controls
• Backlit performance pads for sampling, slicing, cueing and using Serato Scratch Banks
• Turntable-style plunger start/stop buttons
• XLR main and booth outputs
• Two line/phono inputs
• Two TRS/XLR microphone inputs
• Two USB connections
• Complete with Serato DJ Pro software

Specifications

Digital Audio

• Converters: Cirrus Logic, 24-bit PCM, 48kH
• Digital Signal Processing: 32-bit, Floating Point, Double precision
• Dynamic Range (A-weighted, unity gain):
  • ADC: 113dB
  • DAC: 113dB
  • CD Input to Analogue Output: 110dB
  • CD Input to USB Output: 113dB
  • USB Input to Analogue Output : 113dB

Inputs

• Microphone 1/2 (Combo XLR/1/4” [6.35mm] TRS, Mic/Line switchable):
  • Analog Gain: 25dB
  • Maximum Input: 110mV
  • Gain Trim: Off to +26dB (unity at centre)
  • Tone Control: 2-band
• Aux Input (RCA stereo pair):
  • Maximum Input: 4Vrms
  • Dynamic Range (A-weighted): 114dB
  • Gain Trim: Off to +26dB (unity at centre)
  • Tone Control: 2-band
• CD/Phono Inputs 1/2 (RCA stereo pairs, switchable):
  • CD: Line
  • Maximum Input: 4Vrms
  • Gain Trim: Off to +12dB
  • Tone Control: 3-band, full-cut to +10dB
  • THD+N (20kHz BW @ 1kHz): 0.004 percent
  • Phono: RIAA
  • RIAA Curve: +/-0.25dB
  • Gain at 1kHz: 31.5dB
  • Maximum Input at 1kHz: 106mV
  • Dynamic Range (A-Weighted: 102dB

Outputs

• Main Outputs:
  • Gain Trim: Off to 0dB
  • Maximum Output: 8Vrms
  • THD+N (20kHz BW @ 1kHz): 0.004 percent
  • Frequency Response: Flat
• Booth Outputs (XLR):
  • Gain Trim: Off to 0dB
  • Maximum Output: 8Vrms
  • THD+N (20kHz BW @ 1kHz): 0.004 percent
  • Frequency Response: Flat
• Master Outputs (RCA stereo pair):
  • Maximum Output: 4Vrms
  • THD+N (20kHz BW @ 1kHz): 0.004 percent
  • Frequency Response: Flat
• Headphone Outputs (1/4”/6.35mm and 1/8”/3.5mm TRS):
  • Maximum Output Voltage: 4Vrms (no load)
  • Output Power: 50mW (50 ohms)
  • Dynamic Range (A-Weighted: 108dB

General

• Pads: (16) velocity-sensitive multi-colour back-lit pads (8 per deck, 8 modes each)
• Faders:
  • (1) MAG FOUR tension-adjustable crossfader with independent Contour and Reverse controls
  • (2) Standard channel faders with shared Contour and Reverse controls
• Connectors:
  • (2) XLR outputs (Main)
  • (2) XLR outputs (Booth)
  • (1) RCA stereo output pair (Master)
  • (2) XLR / 1/4” (6.35mm) TRS inputs (Mic 1–2)
  • (2) RCA stereo input pairs (Deck 1–2)
  • (1) RCA stereo input pair (Aux)
  • (1) 1/4” (6.35mm) TRS output (Headphones)
  • (1) 1/8” (3.5mm) TRS output (Headphones)
  • (2) USB Type-B ports
  • (1) IEC power cable input
• Power:
  • Connection: IEC
  • Voltage: 100–240V, 50/60Hz
  • Consumption: 50W
• Dimensions (width x depth x height): 26.5” x 13.6” x 4.9” 674 x 345 x 124.3mm
• Weight (including platters): 10.68kg (23.55 lbs)
• Product Code: ONEXUK